Connecting A Digital Airwave Tuner - Yamaha YSP-1100 Owner's Manual

CONNECTIONS

Connecting a digital airwave tuner

If your digital airwave tuner does not support analog broadcasting, make audio/video connections as shown below.
Audio connections
Connect the optical digital output jack of your digital
airwave tuner to the TV/STB OPTICAL DIGITAL IN jack
of this unit. Connect the TV/STB AUDIO IN jacks of this
unit to the analog audio output jacks of your TV in
addition to the optical digital audio connection between
your digital airwave tuner and this unit.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 15).
Digital airwave tuner
Rear panel of this unit
REMOTE IN
RS-232C
Cables used for audio connections
Audio pin cable
(White)
(Red)
Optical cable
20
En
Optical digital
output
DVD AUX TV/STB
COAXIAL
OPTICAL TV/STB
DIGITAL IN AUDIO IN
(White)
(Red)
Video connections
Connect the video output jack of your digital airwave
tuner to the STB VIDEO IN jack of this unit. If your
digital airwave tuner has component video output jacks,
connect the component video output jacks of your digital
airwave tuner to the STB COMPONENT VIDEO IN jacks
of this unit. Once the component video connection is
made, you can enjoy images with better resolution.
Connect to the analog
audio output jacks of
the TV.
COMPONENT
VCR
VCR DVD/AUX
SUBWOOFER
Cables used for video connections
(Yellow)
(Green)
(Blue)
(Red)
Video Component
output video output
Note
You can only
make either a
composite or a
component video
connection.
COMPONENT COMPONENT
STB
VIDEO IN VIDEO OUT
Video pin cable
Component video pin cable
(Yellow)
(Green)
(Blue)
(Red)