Operating other equipment (continued)
Optional connection for set top box
Optional connection for set top box
Set top box
(not included)
Optical digital audio cable
(not included)
• Do not bend sharply when
connecting.
You can change the video signal output from the SCART (AV) terminal from "RGB" to either "S-Video" or
"Video" to suit the type of television you are using.
• Select "S-Video/YPbPr" or "Video/YPbPr" from QUICK SETUP (\ page 8).
• Set "Video Mode" to "Off" (\ page 27, "HDMI" tab, Operations Guide).
• This connection will also enable you to play audio from your television through your home theater system.
Refer to "Operating other equipment" (\ page 34, Operations Guide).
• Do not use the HDMI cable when you use the scart cable for the connection.
10
RQT8043
Television
(not included)
SCART cable
(not included)
SCART cable (not included)
• To listen to the sound from the television, select the appropriate
audio out (example: Monitor) on the television.
Sound from the television
• Press [EXT-IN] (\ page 38, Operations Guide) to select the
"AV" audio input on the remote control.
Rear panel of
this main unit
Optical-In for 5.1 ch
surround
This unit can decode
the surround signal
from the set top box.
Press [EXT-IN] to select
"D-IN" audio input on
the remote control.
• Optical input
settings (\ page 38,
Operations Guide)