Panasonic CF-T2 Series Operating Instructions Manual page 13

Panasonic personal computer user manual
Hide thumbs Also See for CF-T2 Series:
Table of Contents

Advertisement

Windows 2000
CAUTION
Do not press any key or move the touch pad until [Windows 2000 Professional
Setup] is displayed.
1
At [Welcome to the Windows 2000 Setup Wizard], select [Next].
2
After reading the agreement, select [I accept this agreement] or [I don't accept this
agreement], then select [Next].
NOTE
If [I don't accept this agreement] is selected, the Windows setup will be
aborted.
3
Select settings for your region, then select [Next].
4
Enter your name and organization and then select [Next].
5
Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
6
Enter the correct date, time and the time zone, then select [Next].
7 At [Networking Settings], select [Typical settings], then select [Next].
At [Workgroup or Computer Domain], select [No, this computer is not on a
8
network, or is on a network without a domain], then select [Next].
The computer will restart.
9
At [Welcome to the Network Identification Wizard], select [Next].
At [Users of This Computer], select [Users must enter a user name and pass-
10
word to use this computer], then select [Next].
11
Select [Finish].
12
Enter your administrator password and select [OK].
®
Install the Acrobat
NOTE
Acrobat Reader is necessary to read the Reference Manual, which explains
detailed operational procedures concerning your computer or Important Tips.
Match the language for non-Unicode programs and the language of the Acro-
bat Reader as follows.
(Incorrect settings may result in garbled characters.)
Language for non-Unicode programs
in [Control Panel] - [Date, Time, Language, and
Regional Options] - [Regional and Language Op-
tions] - [Advanced]
Chinese (Hong Kong S.A.R.)
Chinese (PRC)
After one Acrobat Reader has been installed, uninstall the existing Acrobat
Reader before installing the Acrobat Reader in a different language.
1
In [start] - [Run], input the following and select [OK].
English:
[c:\util\reader\m\acroreader51_enu_full.exe]
Traditional Chinese: [c:\util\reader\tc\acroreader51_cht_full.exe]
Simplified Chinese: [c:\util\reader\sc\acroreader51_chs_full.exe]
2
Select [Next].
Select [Next].
3
Select [OK].
4
This concludes the first-time use operation guidelines.
Reader.
Acrobat Reader
Traditional Chinese
Simplified Chinese
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cf-t2awazzgh

Table of Contents