Flammable material such as leaves, grass or
twigs may ignite if they come into contact with
hot parts of the exhaust system for extended
periods. There is a risk of fire.
When the auxiliary heating is switched on,
make sure that no flammable material can
come into contact with hot vehicle compo-
nents.
!
Operating the auxiliary heating/ventila-
tion draws on the vehicle battery. After you
have heated or ventilated the vehicle a
maximum of two times, drive for a longer
distance.
i
Switch the auxiliary heating on regularly
once a month for about ten minutes.
Comfort
Switching belt adjustment on/off
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Convenience
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Belt adjustment
Belt adjustment
If the
ted, the vehicle seat belt is shown in orange
in the multifunction display.
X
Press the a button to save the setting.
For further information on belt adjustment,
see (
Y
page 47).
Switching the fold in mirrors when lock-
ing function on/off
This function is only available on vehicles with
a memory function (
Y
When you activate the
rors
function, the exterior mirrors are folded
in when the vehicle is locked.
When you unlock the vehicle and then open a
door, the exterior mirrors fold out again.
If you have switched on the
mirrors
function and you fold in the exterior
Settings
menu.
function.
function is activa-
page 101).
Auto. fold-in mir‐
Auto. fold-in
Menus and submenus
mirrors using the button on the door
(
Y
page 99), they will not fold out automati-
cally. The exterior mirrors can then only be
folded out using the button on the door.
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Convenience
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Auto. fold-in mirrors
Auto. fold-in mirrors
If the
activated, the vehicle's exterior mirror is
displayed in orange in the multifunction
display.
X
Press the a button to save the setting.
Resetting to factory settings
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Factory setting
X
Press a to confirm.
Reset all settings?
The
appears.
X
Press the : or 9 button to select
No
or Yes.
X
Press the a button to confirm the selec-
tion.
If you have selected
display shows a confirmation message.
For safety reasons, not all functions are reset:
Limit speed (winter tyres):
the
tion in permanent SPEEDTRONIC can only be
VEHICLE
set in the
submenu. If you want to
Daytime driving lights:
reset the
Light
submenu, you must turn the key in the
ignition lock to position 1.
Settings
menu.
function.
function is
Settings
menu.
submenu.
message
Yes
, the multifunction
func-
in the
Z
225