Cherry G704B-SR Original Instructions Manual page 10

Declaration of Conformity
We, Cherry Aerospace
Located at 1224 East Warner Avenue, Santa Ana, CA 92705-0157, USA,
In accordance with the provisions of
Hereby declare under our sole responsibility that:
Equipment:
Base Model Number: G-704B
Serial Number: _____________________
Is in conformity with the applicable requirements of the following standards:
EN ISO 12100:2010 Safety of Machinery; General Principles for design; Risk Assessment and Reduction
ISO/TR 14121-1&2:2007
EN 792-1:2000 + A1:2008 Safety requirements; Assembly power tools for non-threaded mechanical fasteners
ISO 8662-11 Hand-held portable power tools -- Measurement of vibrations at the handle
ISO 3744 Acoustics – Determination of sound power levels of noise sources
ISO 4413:2010. Hydraulic fluid power - General Rules of safety
ISO 4414:2010. Pneumatic fluid power - General Rules of safety
Signed by: ________________________________
Cris Cobzaru,
Master of Science in Mechanical Engineering
Sr. Technical Services / Installation Tooling Engineer
The Technical documentation for the machinery is available from:
Name: Chris Houghton
Position: CE Representative and Western Europe Sales Manager
Address: 10 The Beeches, Harbury, Leamington Spa, Warwickshire, UK
Phone 01926 612218, Mobile Phone 07860 725559
Machine Directive 2006/42/EC
Pneumatic Hydraulic Hand Riveter
Safety of Machinery, Risk assessment
Supplier's Federal Identification Code: 11815
10
TM-G704B_SR; Rev.: A
Date: 11/06/13
DCR# 13-1687