Adjust FM settings
1
In FM mode, press MENU to access FM
menus.
2
Press
/
to toggle through the menus.
[SCAN SET]: Access the scan settings.
•
[SYSTEM]: Access system settings.
•
Scan setting
1
Press OK to access the [SCAN SET]
menu.
2
Press
/
to select an option:
•
[STRONG]: Search for strong stations
only.
[ALL]: Search for all stations no matter
•
whether the signal strength of a station
is strong or weak.
3
Press OK to confirm the selection.
System menus
1
Press OK to access system menu.
2
Press
/
to to select a sub-menus.
•
For details, refer to the section 'Use
system menus'.
6 Listen to DAB
radio stations
Listen to DAB radio stations
Note
•
For optimal reception, fully extend the antenna and
adjust its position.
•
You can program a maximum of 20 DAB radio stations.
•
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.
AUDIO-IN/CD
RADIO
OFF
For the first time use
1
Switch the source selector to RADIO and
switch the band selector to DAB.
» [Full scan] menu is displayed.
2
Press OK to activate the automatic search.
» This product automatically stores radio
stations with sufficient signal strength.
BAND
FM
DAB
EN
11