Advertisement
Command: test#
Example:
7.9 Work mode setup
Command: m1,20# or
m2, 600#
or
m3,20#
or
m4#
The default working mode is mode 1,
GSM and GSP always working, every X seconds send GPS data to server. (Range:
10~65535S, default 60S)
For example:m1,20#
mode 2, power saving mode,
every X seconds turn on GPS, and send GPS data to server once, then enter sleep.
(Range: 300~65535S)
For example:m2,600#
mode 3,GSM mode
GPS not work, every X seconds send GSM's cell ID to server, some commands can
- 7 -
Advertisement
