Remington WPG250 User Manual page 6

Tips for best results
• After trimming, lightly go over the trimmed areas with the miniscreen shaver to get a smooth clean
finish. Position the trimmer at a 45° angle so that the plastic area before the foil is touching your skin.
• Since all hairs do not grow in the same direction, you may want to try trimming in different directions
(i.e. upwards, downwards or across) for better results.
NOTE: The miniscreen shaver is designed to shave small detailed areas. It was not designed to shave large
surfaces. For a close comfortable shave of these areas use one of REMINGTON
REPLACING THE FOILS & CUTTERS
To ensure the continued highest quality performance from your shaver, we recommend that foils
and cutters are replaced regularly.
Signs that your foils and cutters need replacing:
Irritation: As foils get worn, you may experience skin irritation.
Pulling: As the cutters wear, your shave may not feel as close and you may feel your cutter
pulling your hair.
Wear through: You may notice that the cutters have worn through the foils.
CARE FOR YOUR TRIMMER
Care for your product to ensure a long lasting performance. We recommend you clean your trimmer
after each use. The easiest and the most hygienic way to clean the shaver is by rinsing the product head
after use under warm water. Always keep trimmer in the off postion when not in use.
AFTER EACH USE
To clean the attachment precision and
Brush the accumulated hair from the cutting assembly.
To clean the miniscreen foil
Hold the trimmer in one hand, with the other press the foil release buttons and gently pull the foil
assembly off the trimmer.
Blow any loose debris from the foil.
Brush the accumulated hair from the cutter assembly.
To replace the foil assembly, hold either side of the foil and push down until you hear a click and
it is firmly attached. Do not press down on the foil.
4
080681_HC70_UK.indd 4
ENGLISH
fine
trimmers
®
's female shavers.
10.09.2008 20:26:07 Uhr