Table of Contents
Advertisement
To find out details about any communication
port with an "!", an "x" or an "arrow" mark, right
click on the port and select [Properties].
Q:
I cannot download recorded data, what should I do?
A:
Check to make sure that there is stored recorded data in the unit? If there is
no recorded data, downloading cannot occur
Check the LCD display of the unit; if there is no data shown to be stored in the unit
downloading cannot be carried out.
If there is recorded data stored in the unit but data cannot be downloaded
please see "Q1: I cannot communicate with my computer using serial (RS-
232C) communication, what should I do?"
Q:
The images are hanging off the display screen. What should I do ?
A:
The display should be set at a resolution of 640x480 dpi or higher.
Q:
The date and the time of the recorded data are different from the actual
date and time. What should I do?
A:
The Thermo Recorder takes the date and time from your computer when it is
set up. Make sure that the date and time are correct on your computer.
Q:
Is the data backed up automatically?
A:
If the battery power goes low while recording the BAT lamp will come on. If
the power decreases even more, recording will be ceased and a backup of
the recorded data will be made.
26
Other
Advertisement
Table of Contents
