Do you have a question about the CS3610 and is the answer not in the manual?
Questions and answers
Luciana
January 26, 2025
Como trocar a senha esquecida da câmera cs3610
1 comments:
Mr. Anderson
February 10, 2025
To reset the forgotten password for the Axess CS3610 camera, follow these steps:
1. Check for a Reset Button: - Locate a physical reset button on the camera. It is usually a small hole that may require a pin or paperclip to press.
2. Perform a Hard Reset: - Power on the camera. - Press and hold the reset button for 10–15 seconds. - Release the button and allow the camera to restart. - The camera will revert to factory settings, including the default username and password.
3. Access the Camera: - Connect the camera to a computer or network. - Use the default IP address (check the user manual or router's DHCP client list). - Enter the default login credentials (often "admin" for both username and password, but check the manual).
4. Set a New Password: - Log in to the camera’s web interface. - Navigate to the security or user settings. - Create a new password and save the changes.
If there is no reset button, refer to the camera’s manual or contact the manufacturer for assistance.
Need help?
Do you have a question about the CS3610 and is the answer not in the manual?
Questions and answers
Como trocar a senha esquecida da câmera cs3610
To reset the forgotten password for the Axess CS3610 camera, follow these steps:
1. Check for a Reset Button:
- Locate a physical reset button on the camera. It is usually a small hole that may require a pin or paperclip to press.
2. Perform a Hard Reset:
- Power on the camera.
- Press and hold the reset button for 10–15 seconds.
- Release the button and allow the camera to restart.
- The camera will revert to factory settings, including the default username and password.
3. Access the Camera:
- Connect the camera to a computer or network.
- Use the default IP address (check the user manual or router's DHCP client list).
- Enter the default login credentials (often "admin" for both username and password, but check the manual).
4. Set a New Password:
- Log in to the camera’s web interface.
- Navigate to the security or user settings.
- Create a new password and save the changes.
If there is no reset button, refer to the camera’s manual or contact the manufacturer for assistance.
This answer is automatically generated