Advertisement
Quick Links
Advertisement
Related Manuals for Jenx Monkey
Summary of Contents for Jenx Monkey
- Page 1 Monkey Rev 03 - March 2008 Assembly Instructions...
- Page 2 Monkey - Parts Lower Chest Assembly Gas Spring Rail Assembly Qty: 1 Qty: 1 Tray Assembly Chest Pad Assembly Qty: 1 Qty: 1...
- Page 3 Monkey - Parts Orange Bowl Footplate Qty: 1 Qty: 1 Side Pad Qty: 2 Monkey Side Qty: 2 (1 Left + 1 right) Castor Rail Side Rail Qty: 2 Qty: 2...
- Page 4 Monkey - Component Identifier Flat Head Assembly Screw S91 (Qty 4) = M6 x 30mm Long S88 (Qty 8) = M6 x 35mm Long S77 (Qty 4) = M6 x 70mm Long Wing Knob (Black) K15 (Qty 4) = M6 x 40mm Long...
- Page 6 Attach the Footplate and Right Monkey Side using: 2 Flat Head Assembly Screws (S77) 2 Barrel Nuts (D24) Tighten securely using the Allen key provided S77 = M6 x 70mm ACTUAL SIZE...
- Page 7 Attach the Left Monkey Side using: 2 Flat Head Assembly Screws (S77) 2 Barrel Nuts (D24) Tighten securely using the Allen key provided S77 = M6 x 70mm ACTUAL SIZE...
- Page 13 Repeat Step 8 for the second Castor Rail Attach the Lower Chest Assembly using: 2 Star Knobs (K26) 2 Spacers (N34) 2 Steel Washers (W33) 2 Barrel Nuts (D24) Align the Barrel Nut using a screwdriver and tighten Star Knobs LOCK CASTORS...
- Page 14 Attach Chest Pad and Side Pad Assemblies to Tray, locate protruding screws of Side Pads into holes in Chest Pad and Tray, ensure the Chest Pad is the correct way up. Fix in place using: 4 Wing Nuts (K11) 4 Steel Washers (W33) Tighten All Wing Nuts Chest and Side Pad Assembly Side View...
- Page 15 Insert 4 Barrel Nuts (D24) into holes indicated.
- Page 16 Align Barrel Nuts Using a screwdriver and attach the Tray Assembly using 4 Flat Head Assembly Screws (S91) DO NOT TIGHTEN FULLY UNTIL INSTRUCTED S91 = M6 x 30mm ACTUAL SIZE...
- Page 19 Monkey...