Table of Contents
Advertisement
CONNECTION/INSTALLATION
Connecting external components
VIDEO OUT
REAR VIEW CAMERA
1 iDatalink input for connecting ADS adapter
(commercially available)
2 Video output (Yellow)
3 Rear view camera input (Yellow)
4 Audio Video input (AV-IN)
5 AV-OUT/Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
6 Front preout*
Audio left output (White)
Audio right output (Red)
7 Subwoofer preout (monaural output)*
Subwoofer left output (White)
Subwoofer right output (Red)
8 Rear preout*
Audio left output (White)
Audio right output (Red)
9 Expansion port for connecting SiriusXM Connect
Vehicle Tuner (commercially available)
* When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
Connecting external amplifiers for 3 way
speakers system
Tweeter preout
Mid range preout
Woofer preout
Speaker
RCA cable (not supplied)
*
* When connecting to an external amplifier, connect its ground wire
to the car's chassis.
Connecting microphone for Bluetooth
Connect the microphone (7) to the MIC terminal.
To install the microphone, peel off the adhesive
tape, fix it on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
– Clean the installation surface beforehand.
7
ENGLISH
69
Hide quick links:
Advertisement
Table of Contents
