Adjusting The Mirrors; Homelink ® Garage Opener - Honda ridgeline Owner's Manual

VEHICLE CONTROLS

Adjusting the Mirrors

Adjust the angle of the mirrors for the best visibility when you are sitting in the correct
driving position.
Rearview Mirror with Day/Night Positions*
n
Manually adjust the position to reduce headlight
glare from vehicles behind you. Flip the tab to switch
between day and night positions.
Automatic Dimming Rearview Mirror*
n
When driving after dark, the automatic dimming
function reduces the glare from headlights behind you.
The function cancels when the shift lever is in
Reverse (R).
Power Door Mirrors
n
Adjust the power door mirrors when the vehicle is on.
L/R selector switch: Select the left or right mirror.
After adjusting the mirror, return the switch to the
center position.
Mirror position adjustment switch: Press the switch
left, right, up, or down to move the mirror.
Folding door mirror button*: Press to fold the door
mirrors in or out.
Reverse Tilt Door Mirrors*
n
Either side door mirror can tilt downward when you shift to Reverse (R) to improve
visibility on the selected side of the vehicle when reversing. The mirror returns to its
original position when you shift out of Reverse.
When in Reverse, slide the selector switch to the left or right side.
48 |
Tab
Day
position
Night position
Folding
Selector
Button
*
Switch
Adjustment Switch
*if equipped
Homelink Garage Opener*
®
Program your vehicle to operate up to three remote-controlled devices around your
home—such as garage doors, lighting, or home security systems—using the buttons on
the ceiling.
Models without
moonroof
n Training a Button
Park near the system you want to program, and follow the instructions in the flowchart
below.
1
Position the remote transmitter you wish
to link 1–3 inches (3–8 cm) from the
HomeLink button you want to program.
2
Press and release the desired HomeLink
button. Hold the button on the remote
transmitter.
Does the HomeLink indicator (LED) change
from slowly blinking to constantly on or
rapidly blinking? This should take less than
one minute.
NO YES
a
Press and release the HomeLink
button. Press and release the button on
the remote every 2 seconds.
Does the LED change from slowly blinking
to constantly on or rapidly blinking? This
should take less than one minute.
NO YES
To retrain a button or erase codes, see the Owner's Manual on the Owner Information
CD or at owners.honda.com (U.S.) or www.myhonda.ca (Canada).
If you need help, visit www.homelink.com or call (800) 355-3515.
VEHICLE CONTROLS
Models with moonroof
Buttons
Buttons
Indicator
Indicator
3
Press and hold the programmed
HomeLink button for about a second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold the
complete
HomeLink button
again.
HomeLink indicator HomeLink LED
rapidly blinks.
remains on.
a
The remote has a rolling code. Press the
"learn" button on the remote-controlled
device (e.g., garage door opener).
Within 30 seconds, press and hold the
b
programmed HomeLink button for
2 seconds.
Press and hold the HomeLink button
5
again; the remote-controlled device
should operate.
*if equipped
| 49