Running The Measurements - miniDSP DDRC-22D User Manual

4.4 R
UNNING THE MEASUREMENTS
Measurements are performed on the Measurements tab.
Measurements should be performed under good conditions. While the measurement technique used by Dirac
Live is quite robust, low-frequency noise (traffic, machinery, aircraft, storms) in particular can adversely affect
measurement accuracy. A high level of ambient noise can degrade signal to noise ratio and prevent the
algorithm from analyzing the test sweep signal properly. Minimize the effect of any external noise, ensure that
measurement signal levels are adequate, and/or choose a suitable time for performing measurements.
22
miniDSP Ltd – Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice