Section Two; Understanding Your Scale; Keyboard Functions - Setra Systems 35CP Manual

Table of Contents

Advertisement

KEYBOARD FUNCTIONS

zero
Clears the display and tare memory. Assigns the pan and whatever is
currently being weighed a value of zero.
count
Instructs the scale to begin or continue counting.
setup/cal
Instructs the scale to accept or to enter the advanced function
programming mode.
apw
Instructs the scale to accept an average-piece-weight entry or display
average piece weight.
clear
Clears the display and the last number entered or function requested,
and displays weight.
Note: — clear acts as a reset function, setting all counting and weighing
registers to zero.
tare
Assigns weight on the pan as the "tare" or container weight, subtracts
the weight from the display and saves it in the tare register, leaving the
display to read "net" or contents weight.
gross
Adds weight saved in tare register to net weight to display gross
weight.
print
Sends to a printer (or other peripheral device) information displayed,
along with all stored and programmed fields of information.
conv
Converts weighing units (for example, changes from grams to ounces).
accum
Stores and sums results of weighing or counting functions.
i.d.
Instructs scale to accept an identification number of up to 25 digits for
use as desired; (e.g., a part number or account number.)
./ rcl
Instructs scale to recall the value stored in any of the various registers
(tare, accumulate, etc.). Also instructs scale to enter a decimal point
during numeric entry.
Instructs scale to change the sign of a number. Also acts as a second
function key for commands.
Understanding Y our Scale
9
Section T wo

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 35CP and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

70cp140cp

Table of Contents