Table of Contents
Advertisement
FCC RF exposure requirements and
should be avoided.
For more information about RF
exposure, visit the FCC website at
www.fcc.gov.
Specific Absorption Rates
(SAR) for Wireless Phones
The SAR value corresponds to the
relative amount of RF energy
absorbed into the head of a user of a
wireless handset.
The SAR value of a phone is the result
of an extensive testing, measuring and
calculation process. It does not
represent how much RF the phone
emits. All phone models are tested at
their highest value in strict laboratory
settings. But when in operation, the
SAR of a phone can be substantially
less than the level reported to the FCC.
This is because of a variety of factors
including its proximity to a base station
antenna, phone design and other
factors. What is important to
remember is that each phone meets
strict federal guidelines. Variations in
SARs do not represent a variation in
safety.
All phones must meet the federal
standard, which incorporates a
substantial margin of safety. As stated
108
above, variations in SAR values
between different model phones do
not mean variations in safety. SAR
values at or below the federal
standard of 1.6 W/kg are considered
safe for use by the public.
The highest reported SAR values of
the Hydro LIFE are:
Head: 1.02 W/kg
Body-worn: 0.69W/kg
Hotspot: 0.82 W/kg
Phone models may have different
versions and more than one value.
Changes in design or components
may occur over time and some
changes could affect SAR values.
More information on the phone's SAR
can be found on the following FCC
website: http://www.fcc.gov/oet/ea/.
FCC Radio Frequency
Emission
This phone meets the FCC Radio
Frequency Emission Guidelines.
FCC ID number: V65C6530
FCC Notice
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) this
device may not cause harmful
User Guide
Advertisement
Table of Contents
