Table of Contents
Advertisement
10 LINE/MIC
Push button to select the input sensitivity (line or microphone level).
LED MIC
This LED lights up if the input sensitivity is set to MIC (microphone level).
LED LINE
This LED lights up if the input sensitivity is set to LINE (line level).
11 120Hz
Use this switch to attenuate the low frequencies below 120 Hz. The function reduces the transmission of impact noise
and so increases the woofers life time.
12 CLIP
Indicates clipping. If this LED flickers or lights up, the input level is too high.
Connections and operating elements
PA 108 A
17
Advertisement
Table of Contents
