Table of Contents
Advertisement
Connections and operating elements
7 ON/OFF
Use the mains switch to turn the unit on or off.
8 115V/60Hz — 230V/50Hz
Mains voltage selector. Before switching the unit on, make sure this selector is set correctly for the actual supply
voltage at the operating location!
9 STANDBY
Push button to enable or disable the energy saving mode.
When the box receives no signal for 60 minutes, it switches to standby mode. When it receives a signal again, it auto‐
matically switches back to normal mode.
LED ACTIVE
Power indicator LED. This LED is permanently on in normal mode. It goes off when the energy-saving mode is ena‐
bled and the box enters the standby mode.
LED STANDBY
Standby mode. This LED lights up when the energy saving mode is enabled and the box enters the standby mode. It
goes off again when the box switches back to normal.
16
active 2 way full-range speaker
Advertisement
Table of Contents
