Assembling Directional Spool; Installing Orifice And Throttle Check Valve - Danfoss OSQA Service Manual

Service Manual
OSQA/OSQB
Assembly

Assembling directional spool

Installing orifice and throttle check valve

© Danfoss | July 2016
2.
Screw in throttle/check valve (4) using a 8 mm
Screw in orifices, 2x (26) in directional spool (25) using a 4 mm
the spool, 5 ± 1 N·m [45 ± 10 lbf·in].
1.
Screw orifice (36) in housing using a 4 mm
Hex key and a multigrip pliers, 10 ± 0.3 Nm.
Hex key and mandrel for holding
Hex key, 5 ± 1 N·m [45 ± 10 lbf·in].
HN25D293 | AX00000127en-US0101 | 29