Specifications - NAD C 315bee Service Manual

SPECIFICATIONS

PREAMP IN , SPEAKERS OUT
CONTINUOUS AVERAGE POWER
OUTPUT INTO 8 OHMS OR 4 OHMS
(Min. power per channel, 20 Hz – 20 kHz,
with no more than rated distortion)
THD + Noise
Clipping power
(maximum continuous power per channel 4 and 8).
IHF dynamic headroom: at 8 ohms
IHF dynamic power
(maximum short term power per channel) 8 ohms:
Damping factor(ref. 8 ohms 1 kHz)
Input Impedance
Input sensitivity (for rated output into 8 ohms)
Voltage gain
Frequency response 20 Hz – 20 kHz
Signal / Noise ratio, A-weighted
SMPTE I.M.
(Intermodulation Distortion, 60 Hz + 7 kHz,
4:1, from 250 mW to rated output)
IHF I.M.
(CCIF IM Distortion, 19 + 20 kHz at rated output)
Headphones Output Impedance
Maximum input signal
CONTROLS
Treble
Bass
DIMENSIONS AND WEIGHTS
DIMENSION (WHD)
at 4 ohms
4 ohms:
2 ohms:
Net Weight
Shipping Weight
40 W (16 dBW)
< 0.02%
45 W
+ 3.6 dB
+ 4.8 dB
90W (19.5 dBW)
120W (20.8 dBW)
170 W (22.3 dBW)
> 200
R = 50 kohms
C = 100pF
200 mV
39 dB
<+/-1.0 dB (tone defeat off)
<+/-0.2dB (tone defeat on)
95dB ref. 1 W
111dB ref. 40 W
< 0.02%
< 0.01%
68 ohms
7 V
+/- 5 dB at 10 kHz
+/- 8 dB at 100 Hz
5.25 kg ( 11.5 Ib)
6.5 kg (14.3lb)
435 X70 X 242mm