Frost-Free Storage - Philips senseo HD7810/65 User Manual

Hide thumbs Also See for senseo HD7810/65:
Table of Contents

Advertisement

ENGLISH
16
7
Press the 2-cup button qq and let the machine operate. Repeat this
until the water reservoir is empty.
Note: Make sure that you use up the descaling mixture completely during the
descaling cycle.
Never interrupt the descaling cycle.
8
Exchange the 1-cup pod holder ° for the 2-cup pod holder °°.
Place a used pod in the 2-cup pod holder °° and close the lid.
9
Repeat steps 3 to 7.
Never descale the coffee machine with the lid open. Make sure the lid is
properly locked.
10
Remove the used pod and clean both pod holders after descaling
with hot water and a dishwashing brush to prevent the sieve in the
center from getting clogged.
11
Rinse the water reservoir with clean cold water. Fill the water
reservoir up to the MAX indication with clean cold water and repeat
steps 5 to 7.
Note: Do not refill the water reservoir with used hot water or the used
descaling mixture.
12
Rinse the water reservoir once again with clean cold water. Fill the
water reservoir with clean cold water up to the MAX indication and
repeat steps 5 to 7 once more.
Note: Always rinse the machine by letting it empty two full water reservoirs.

Frost-free storage

If the coffee machine has already been used and therefore has been
flushed with water, it may only be used and stored in a frost-free place to
prevent it from becoming damaged.
Assistance
For assistance, call 1-866-4 Senseo (1-866-473-6736) or visit our
website at www.senseo.us.
Disposal
This product may contain lead and mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or visit
www.recycle.philips.com.

Advertisement

Table of Contents
loading

Table of Contents