Panasonic TX-32CSW514 Ehelp page 263

Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
Watching > Tuning and editing channels > Other settings
For DVB-C
●
Signal Condition
Checks the signal condition.
Watching > Tuning and editing channels > Signal Condition
Not valid in Analogue
●
Antenna System
(One LNB / MiniDiSEqC
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
●
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
●
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
Add TV Signal
Adds the TV mode.
Watching > Tuning and editing channels > Other settings
= Note =
The settings in Tuning Menu
●
The menu name varies depending on the TV mode.
/ DVB-C Tuning Menu
Analogue Tuning
/ DiSEqC 1.0 / Single
are applicable only for the selected TV mode.
/ DVB-T Tuning Menu
Menu)
- 263 -
Cable)
(DVB-S Tuning Menu
/ DVB-via-IP Tuning Menu /