Recording - Panasonic RQT9359-P Operating Instructions Manual

Recording

• Turn the power on ( ➜ page 6).
• Press to stop the unit.
STOP
Slide recording position switch to
1
select a position.
Switch modes according to situations ( ➜ page 8).
Select a folder for recording.
2
The folder is switched each time you press
Select among "
" ").
When you select "
saved in " " (If the folder already contains 99 files,
the next folder with recordable space is used).
3
Press (Recording starts).
REC/PAUSE
Each time you press Pause
Display during recording
Light stays on. (Blinks while paused.)
The display changes depending
on recording levels.
In stereo Top side: ch-L/Bottom
side: ch-R
Recording elapsed time
(Blinks while paused.)
To stop:
STOP
Press .
" (The factory setting is
", recording is automatically
Recording resumes
Folder
[Folder] for this unit means locations in which
recording (music) files are stored. There are 4
audio folders "
this unit.
Using each folder according to the purposes of
recording enables you to search files easily later.
FOLDER A maximum of 99 files can be saved into each
.
audio folder to
File
Recorded audio data from the starting point to the
ending point is saved as a file.
The saved data is called a file.
* Even if you change the position of Recording
position switch during recording, the setting
will not be changed until the recording is
complete.
* Change the recording mode as necessar y
( ➜ page 15).
*
Do not block the holes of the zoom microphone
and built-in microphone dur ing recording
( ➜ page 4).
" and 1 music folder "
.
" in
9