Plc Side Setting - Mitsubishi GOT2000Series Connection Manual

4.5 PLC Side Setting

POINT POINT POINT
FUJI PLC
For details of FUJI PLCs, refer to the following
manuals.
FUJI PLC user's Manual
Model name
RS-232C
NV1L-RS2
interface card
NC1L-RS2
General-purpose interface
NC1L-RS4
module
FFU120B
RS-232C/485
FFK120A-C10
interface capsule
4 - 14
4. CONNECTION TO FUJI PLC
4.5 PLC Side Setting
4.5.1

Communication settings
Make the communication settings using setting
switches.
Refer to
MODE
4.5.1
Transmission speed
*1
Data bit
4.5.2
4.5.3
Parity bit*1
4.5.4
*1
Stop bit
Initializing method
*1

Settings by switch
Make the communication settings using each setting
switch.
(For the NV1L-RS2)
(Front view)
(1) Setting of the MODE
Make the MODE settings using the MODE switch.
Command-setting-type
start-stop
synchronization,
nonsequence format
Connecting to NV1L-RS2,
NC1L-RS2
Item
Command-setting-type start-stop
synchronization, nonsequence format
*1
9600bps, 19200bps
8bits or 7bits
Even or Odd
Done, None
1bit, 2bits
By switch
Adjust the settings with GOT settings.
Character configuration
switches
Operation mode
setting switch
(Rear view)
Switch position
MODE
NV1L-RS2 NC1L-RS2
1
Set value
(For the NC1L-RS2)
(Front view) (Rear view)
1