GE JEB100B Use And Care Manual page 23

Auto Cook Codes
Auto Cook codes 1 through 8 are designed to give
you easy automatic results with a number of foods.
Code 1, designed for reheating foods quickly, turns
the oven off automatically as soon as the sensor
detects steam from the foods.
Example:
Step 1: Place covered food in oven.
Touch AUTO COOK pad. "ENTER
COOK CODE" flashes on display.
AUTO
COOK
Step 2: Touch number pad for desired
code. "CODE 2" shows on the display.
START
Touch START.
How to Adjust Auto Cook Codes to Suit Your Taste
By simply adding a 1 after any Auto Cook code
number, you can set the oven to cook for 20Y0 less
time than the code would regularly provide.
For example, if code 4 cooks your chicken more done
than you like it, set code 41 next time and you'll get
20% shorter cooking time.
Example:
n
Step 1: Touch AUTO COOK pad.
AUTO
COOK
Step 2: Touch number pads 4 and 1
in that order. "AUTO CODE 4"
shows on the display.
When codes 2 through 8 are selected, the oven
determines how much additional cooking time is
needed after steam has been sensed, automatically
switches to TIME COOK and signals. The word
"AUTO" on the display is then replaced by
countdown numbers indicating remaining cooking
time, When the signal is hear{, the oven~oor ma~
be opened for stirring, turning or rotating food.
Step 3: Word
"AUTO" shows on
display, indicating
steam sensor is
OPEN DOOR.
OPENING DOOR MAY AFFECT COOKING
PERFORMANCE.
Step 4: Beep sounds
replaced by cook
time. Rotate or stir
food, if necessary.
When done, oven beeps every minute until door is
opened or CLEAWOFF is touched.
If you want a longer cooking time than a code
provides, add a 9 after the code.
For the chicken in the example at left, code 49 would
provide 20% longer cooking time than the regular
code 4 would provide.
Step 3: Touch START. "AUTO" shows
on display. DO NOT OPEN DOOR until
I
START
first oven signal, then rotate dish 1/2
J turn if necessary. Close door and touch
START to finish cooking.
CODE
COOK
CODE
COOK
23