Setting the DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the
memory card for printing and specify the number of print copies in advance using the
camera. This is extremely convenient for sending the images to a photo developing
service or for printing on a direct print function compatible printer.
1
Turn the power on, and set the camera to
the PLAY mode (
2
Open the menu.
s
3
Press
4
Press
button.
5
Set the number of copies.
6
Print the date stamp out.
7
Press
MENU button to cancel.
8
After you finished all image settings, select [
to apply it.
41
Downloaded From camera-usermanual.com Agfa Manuals
page 13).
Press the MENU button, then use the
four-way control to select DPOF (
and press the SET button.
or
to select [Single], then press the SET button.
To set the DPOF setting for all images in a time, select [All] in this step.
To reset all DPOF settings to initial default, select [Reset] in this step.
or
to select the image you want to print out, then press the SET
Press
or
to specify the number of copies.
The number of copies can be set from 0 to 30.
To cancel this image DPOF setting, set the number of copies to 0.
Press
and then press
current image.
Repeat step 4~6 to other images for printing.
and then press the SET button to apply the setting or press the
)
or
to set or cancel the date stamp of
] and press the SET button