Recommended Tools; Disassembling Steps - Lenovo I360 Maintenance Manual

I360 Mobile Phone Maintenance Manual v0.1
Attention Most of the circuit elements of this device are prone to static
damage. When operating, transporting the device or maintaining the
internal elements, measures should be taken against static electricity.

3.1 Recommended tools

The following tools are recommended for disassembling or assembling the
mobile phone (or similar tools with the same functionality can be utilized).
a. Anti-static pad (including the grounding lead)
b. Anti-static bracelets
c. Rotary screw driver (Type T5，with a torque of 0.15Nm）
d. Ф1.4mm cross screw driver
e. Nipper
f. Chock gauge （ 100mm in length） ,type: 0.02mm-1.00mm (the mesne thickness
is 0.4mm )
g. Digital multimeter
h. Oscilloscope
i. Electric soldering iron
j. Heat gun
Communications system analyzer
j.

3.2 Disassembling Steps

The steps for assembling components of the mobile phone are described
as below. Disassembling can be done with the reversed steps.
15 15
Page of
LENOVO
Lenovo Mobile Telecommunications Co., Ltd.（OPEN DOC）