Headset Bluetooth™ (De) - Siemens HHB-600 Manual

Headset Bluetooth™ (en)
LED display explained
The LED (Light Emitting Diode)
indicates the different states of
the headset:
Note
The colour of the LED depends on the
charge status:
• RED indicates a flat battery
• GREEN indicates sufficient charge.
Steady
Indicates end of the
GREEN
charging process.
Steady RED
Battery charging.
Flashes
Battery empty.
RED 3x
Steady
During registration.
Flashes 5 x
Registration success-
ful completed.
Flashes
The headset has been
5x
reset to the default set-
tings.
Flashes
The headset is now
slowly
ready for operation
Flashes
• Incoming call or
rapidly
• During a call
Off
Headset switched off.
Adjusting the headset
The Headset comes with two ear
hooks for different ear sizes. Se-
lect the right one for your ear.
You can reverse the ear hook so
that you can wear the headset
on the left or right ear.
1. Pull the ear hook backwards
out of its holder.
2. Turn the ear hook and careful-
ly insert it on the other side:
• for the right ear:
• for the left ear:
5