Table of Contents
Advertisement
Before using your washing machine for the first time
Wash once without any laundry
Sort and load the laundry
Follow manufacturer's care information.
According to the information on the care labels.
According to type; colour; degree of soiling and temperature.
Do not exceed maximum load.
Follow important instructions!
Load large and small items of laundry!
ose the door. Do not jam items of laundry between the washing machine
Add detergent and care product
amount of laundry, degree of soiling, water hardness (available from your
water utility company) and manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into corresponding dispenser or place in the drum.
Be careful when opening the detergent drawer while the appliance is
Dilute viscous fabric softener and fabric conditioner with water.
Prevents blockage of the overflow.
Select ** and adjust a programme
** If the symbol
display panel, the childproof lock
Start/Reload
is active.
Functions and option buttons
Individual settings, Page 5
Select
If you press and hold the function
buttons, the selected display
values will run automatically!
Select the temperature (
= cold)
Select the spin speed (*depending on model) or
- - - - (Rinse hold = without final drain/spin, the laundry
remains in the final rinsing water, - - - - on the display panel)
Programme ends in ...
Programme progress displays:
Washing, Rinse, Spin, programme duration or end
Childproof lock
Page 5
Door open symbol on if the door can be opened
Page 9
Page 7
Page 9
door and rubber seal.
Dosage according to:
running!
1
flashes on the
Deactivate, Page 5
2
Start/Reload
Washing
Detergent drawer
with dispensers I, II,
Door
Fascia
Door handle
Service flap
Washing
3
Switch off
Set the programme selector to
Turn off the tap
Not required for Aqua-Stop models.
Notes, Installation instructions, Page 7
Remove the laundry
Open the washing machine door and remove the
laundry.
If - - - - (Rinse hold = no final drain/spin) is active: Set the
programme selector to
Spin/Empty
spin speed.
Press
Start/Reload button.
– Remove any foreign objects as there is a risk
of rusting.
– Leave detergent drawer and door open so that
residual water can evaporate.
End of programme when ...
...
is indicated on the display panel.
Cancel the programme
For programmes at high temperature:
– Cool the laundry: Select
Rinse.
– Press the
Start/Reload button.
For programmes at low temperature:
3
– Select
Spin/Empty
(if only one drain cycle
is required: Set the
(Spin speed) to - - - -).
– Press the
Start/Reload button.
Change the programme if ...
... you have mistakenly selected a wrong programme:
– Reselect the programme.
– Press the
Start/Reload button. The new programme
starts from the beginning.
Interrupt/continue
the wash cycle ...
... e.g. for Soaking.
Page 9
Press the
Start/Reload button.
the display panel, the washing machine door cannot be
opened. To continue the programme, press the
Reload button.
Off.
or select the
(No) is indicated on
Start/
4
Advertisement
Table of Contents
