Easy Exit Seat
The controls for this memory function are located on the
driver's door.
B
This button is used to program and recall the
desired driver's seat position when exiting/entering the
vehicle. The seat position can be personalized for
both driver 1 and driver 2.
To store the seat exit position for driver 1 or 2, do the
following:
1. Select the desired driver number by pressing and
releasing the 1 or 2 button. The seat will move to
the stored memory position.
2-46
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button of the memory
control for three seconds. A double chime will sound
to let you know that the position has been stored
for the identified driver, 1 or 2.
To use the seat exit position, do one of the following:
•
Press the exit button on the memory control.
•
If this feature is has been enabled in the DIC,
removing the key from the ignition will cause
the seat to move to the exit position.