Table of Contents
Advertisement
Technical Information
HDMI (high-defi nition multimedia interface) allows you to enjoy high-defi nition digital images and high-quality sound
by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI output terminal, such as a set top box or a DVD player, can be
connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
•
HDMI is the world's fi rst complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•
Audio settings can be made on the "HDMI1 input" menu screen. (p. 18)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(∗1): The HDMI logo is displayed on an HDMI-compliant equipment.
Note
•
HDMI2 terminal is for digital signal only.
•
Use with a PC is not assumed.
•
The 720p/1080i signals will be reformatted before being displayed on the screen.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•
These HDMI connectors are "type A".
•
An equipment having no digital output terminal may be connected to the input terminal of either "Component",
"S-VIDEO", or "Video" to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 39.
•
DVI picture position is controlled by the source equipment (ie; STB, DVD player etc.). If you experience picture
position errors using DVI to HDMI adapter cable, please contact the source equipment manufacturer.
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
•
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
•
Some PC models cannot be connected to this TV.
•
For details of the applicable PC signals, see p. 39.
•
Max. display resolution
4:3
1,024 × 768 pixels
Aspect
16:9
1,366 × 768 pixels
•
D-sub 15-pin connector signal
Pin No.
Signal Name
5
4
3
2
1
10
9
8
7
6
15 14 13 12 11
NC (not connected)
GND (Ground)
HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
This function may not work normally depending on the equipment condition.
•
This function may not work normally when Panasonic Player theatre is connected.
•
The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Amplifi er. Read the manuals of Amplifi er.
•
"Control with HDMI" function is not possible using DVI connection.
38
HDMI connection
(∗2): Enquire at your local digital equipment retailer shop.
PC connection
Pin No.
Signal Name
Pin No.
R
GND (Ground)
G
GND (Ground)
B
GND (Ground)
NC (not connected)
GND (Ground)
Control with HDMI
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing
the Stereo / Bilingual Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Mode Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast
Mode Indicator
Note
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
∗ Mark: Applicable input signal for Component (Y, P
Signal name
480i (60 Hz)
480p (60 Hz)
576i (50 Hz)
576p (50 Hz)
720p (60 Hz)
720p (50 Hz)
1,080i (60 Hz)
1,080i (50 Hz)
Signal Name
640 × 400 @70 Hz
640 × 480 @60 Hz
NC (not connected)
640 × 480 @75 Hz
NC (not connected)
852 × 480 @60 Hz
HD/SYNC
800 × 600 @60 Hz
VD
800 × 600 @75 Hz
NC (not connected)
800 × 600 @85 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
1,366 × 768 @60 Hz
Macintosh13" (640 × 480)
Macintosh16" (832 × 624)
Macintosh21" (1,152 × 870)
•
Note
•
•
•
Stereo / Bilingual Sound Selection (Analogue mode)
STEREO
MAIN
I
I
Regular broadcast
Regular + NICAM MONO
(Standard Audio)
(MAIN
)
I
No Indicator
I
Regular broadcast
BILINGUAL or DUAL MONO:
(Standard Audio)
MAIN
/ SUB
I
II
No Indicator
I
II
Input signal that can be displayed
/C
, P
/C
), HDMI and PC (D-sub 15P)
B
B
R
R
Horizontal frequency (kHz)
Vertical frequency (Hz)
15.73
59.94
31.47
59.94
15.63
50.00
31.25
50.00
45.00
60.00
37.50
50.00
33.75
60.00
28.13
50.00
31.46
70.07
31.47
59.94
37.50
75.00
31.47
59.94
37.88
60.32
46.88
75.00
53.67
85.06
48.36
60.00
56.48
70.07
60.02
75.03
68.68
85.00
63.98
60.02
48.36
60.00
35.00
66.67
49.72
74.54
68.68
75.06
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Applicable input signal for PC is basically compatible to VESA standard timing.
PC signal is magnifi ed or compressed for display, so that it may not be possible to show fi ne detail
with suffi cient clarity.
SUB
MONO
II
II
NICAM DUAL MONO
I
NICAM STEREO
(MAIN
/ SUB
)
I
II
I
II
STEREO
Component
HDMI
PC
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
39
Hide quick links:
Advertisement
Table of Contents
