Table of Contents
Advertisement
1.
PRODUCT REVISION HISTORY
The following information provides an historical summary of changes made to this product since the
original release.
Operating & Service Manual Version
Rev 8 11/07/18
Rev 7 10/04/05
Rev 6 08/05/05
Rev 5 07/10/10
Rev 4 07/03/26
Rev 3 04/12/21
Rev 2 04/03/10
Rev 1 03/04/15
Rev 0 02/12/20
Contact Thomson Power Systems, to obtain applicable instruction manuals or if in doubt about any
matter relating to installation, operation or maintenance. Soft copy of the most current version is
available at www.thomsontechnology.com.
NOTE: All information contained in this manual is for reference only and is subject
to change without notice.
1.1.
ENVIRONMENTAL CONDITIONS
Failure to store and operate equipment under the specified environmental conditions may
cause equipment damage and void warranty.
1.1.1.
EQUIPMENT STORAGE
The transfer switch shall be stored in an environment with a temperature range not
exceeding -4° to +158° Fahrenheit (-20° to +70° Celsius) and a humidity range not
exceeding 5%-95% non-condensing. Before storing, unpack sufficiently to check for
concealed damage. If concealed damage is found, notify the ATS supplier and the
Carrier immediately. Repack with the original, or equivalent packing materials. Protect
from physical damage. Do not stack. Store indoors in a clean, dry, well ventilated
PM059 REV 9 14/01/16
TS 830 TRANSFER SWITCH
Miscellaneous corrections
Revision to add S Style Mechanism 100A-800A
Revision to add HS Style Mechanism 630A-800A
Revision to add HS Style Mechanism 100-400A
Revision to add MEC 310 controller
Revisions to incorporate the new model coding.
Revisions to mechanism style 1000A, 1200A & 1600A.
Revisions to text, dimensions, & cable specifications.
Original release.
CAUTION!!!
1
Thomson Power Systems
Advertisement
Table of Contents
