Bomberg BOLT-68 User Manual page 11

BOLT-68 - Chronograph
Normal crown position
pusher a
Date*
Hour hand
Chronograph display:
-1/10 seconds
-10 hours
Chronograph
minute hand
18
2nd click position
1st click position
Crown
pusher B
Chronograph
second hand
Minute hand
Second hand
BomBERG modEl - BolT-68 - Chronograph
Setting the time:
1. Unscrew and pull the crown out to the 2nd click position so that the sec-
ond hand stops.
2. Turn the crown to set the hour and minute hands.
3. After the time has been set, push the crown back to the normal position
and small second hand begins to run again. Screw it in back now.
Setting the date:
1. Unscrew and pull the crown out to the 1st click position.
2. Turn the crown anti-clockwise to set the date.*
3. After the date has been set, push the crown back to the normal position
and screw it in.
*Important: It is not possible to adjust the date between 8.30 pm and 0.00 am.
It is necessary to adjust the date after each month with less than 31 days.
19