WARRANTY & usER INsTRuCTIoNs Limited 2 years warranty: International warranty Page 3-4 Your Bomberg watch is warranted for a 2 years period under the terms and Special recommendation Page 5-7 conditions of this warranty. Instructions Model - BOLT-68 - 3 Hands & GMT...
Where should I go to get my watch serviced or for a new battery? We recommend that you go to an official Bomberg agent or retailer. They are the only people who have the necessary tools and devices to work on your watch and to carry out the necessary checks at specialized level.
Page 5
Salt-Water: always rinse your watch in fresh water after swimming in the sea. by an approved Bomberg agent. Shocks: avoid subjecting your watch to shocks, including sudden changes...
Page 7
BOLT-68 - 3 Hands & GMT BomBERG modEl - BolT-68 - 3 Hands & GmT 2nd click position 1st click position Setting the time: Normal crown position 1. Unscrew and pull the crown out to the 2nd click position so that the second hand stops.
Page 9
BOLT-68 - 3 Hands Automatic BomBERG modEl - BolT-68 - 3 Hands Automatic 3rd click position Manual winding: 2nd click position 1. Unscrew and pull the crown out to the 1st click position. Normal crown position 1st click position 2. Turn the crown anti-clockwise to wind the watch..
Page 11
BOLT-68 - Chronograph BomBERG modEl - BolT-68 - Chronograph 2nd click position Normal crown position Setting the time: 1st click position 1. Unscrew and pull the crown out to the 2nd click position so that the sec- ond hand stops.
Page 12
BOLT-68 - Chronograph BomBERG modEl - BolT-68 - Chronograph BomBERG modEl - BolT-68 - Chronograph Measuring time with the chronograph: Chronograph reset (INCL. AFTER REPLACING BATTERY): 1. The chronograph can be started and stopped each time “A” is This procedure should be performed when the chronograph second hand pusher pressed.
Page 14
BOLT-68 - Chronograph Automatic BomBERG modEl - BolT-68 - Chronograph automatic 3rd click position Manual winding: 2nd click position 1. Unscrew and pull the crown out to the 1st click position. Normal crown position 1st click position 2. Turn the crown anti-clockwise to wind the watch.
Page 15
BOLT-68 - Chronograph Automatic BomBERG modEl - BolT-68 - Chronograph automatic Measuring time with the chronograph: 1. Press the pusher “A” to start the chronograph and press the pusher “B” to stop the chronograph. 2. Press “B” again to reset the chronograph. The hands return to zero.
Page 17
3. Lift the watch case from the attachment to remove it from the band. Using an ingenious bayonet system with a trigger guard – an exclusive system patented by BOMBERG – the time-keeping module can be detached from its base and attached to a metal chain.
Page 18
BOLT-68 - Bayonet system disassembly Rotate to unlock Assembly Rotate to lock...
Page 19
Bomberg A division of Park Lane Partners SA Rue de la Gare 4 2034 Peseux/NE Switzerland Website: www.bomberg.ch Information: welcome@bomberg.ch...
Page 20
Bomberg SA A division of Park Lane Partners SA Rue de la Gare 4 2034 Peseux/NE Switzerland Website: www.bomberg.ch Information: welcome@bomberg.ch...