Sync; H-Freq. (Khz) / V-Freq. (Hz) - Panasonic TH-37PWD8WK Operating Instructions Manual

Sync

Select Signal from the "Setup" menu during RGB input signal.
1
2
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input
signal).
Auto: The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.

H-Freq. (kHz) / V-Freq. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB / PC and DVI input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
Press to adjust.
Press to exit from adjust mode.
Setup for Input Signals
Setup
Signal
Component/RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
Press ACTION ( ) button
Signal
Sync
Cinema reality
P-NR
H-Freq. 33.8
V-Freq. 60.0
Sync
Sync
Sync
H-Freq. 33.8
V-Freq. 60.0
1/2
RGB
PC
Off
Off
Off
Off
English ( UK )
[ RGB ]
Auto
Off
Off
kHz
Hz
Auto
on G
VBS
kHz
Hz
37