Safety Precautions - Panasonic TH-32LRT12U Operating Instructions Manual

Safety Precautions

CAUTION
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
• Wall-hanging bracket (angled) ..................................................TY-WK32TM1
• Wall-hanging bracket ...............................................................TY-WK32TM2
• ATSC Tuner for Hospitality .......................................................Enseo DTB1510 / Enseo DTB1510 TB
• Main Board (32") ......................................................................TNM4CD0819FA
• Main Board (37") ......................................................................TNM4CD0819FB
• Power Board (32") ....................................................................TNM4CD0821F
• Power Board (32"/37") .............................................................TNM4CD0822F
• IR Board ...................................................................................TNM4CD0906F
• RS232 Board ............................................................................TNM4CD0820F
•SW+AV3 Board (37") ................................................................TNM4CD0807F
• Key Board (32") ........................................................................TNM4CD0809F
• AV3 Board (32") .......................................................................TNM4CD0810F
• SPEAKERS ..............................................................................TTX4CM008C
Always be sure to ask a qualified technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being
played with by young children, creating the potential risk of suffocation.
When using the LCD Display
Do not bring your hands, face or objects close to the
ventilation holes of the Display.
• Top of the Display is usually very hot due to the high
temperature of exhaust air being released through the
ventilation holes. Burns or personal injuries can happen if
any body parts are brought too close. Placing any object
near the top of the display could also result in heat damages
to the object as well as to the Display if its ventilation holes
are blocked.
Be sure to disconnect all cables before moving the
Display.
• Moving the Display with its cables attached might damage
the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a
To Prevent the Display From Falling
Required accessories:
1. Use the wood screw to attach the holding strip
to the base table (C).
Note:
If the base table has no hole, align with the hole
on the holding strip and dig one on the base
table.
2. Screw the holding strip to the pedestal (B).
Note:
Make sure that the holes on the holding strip are
properly aligned with the pedestal and the base
table to ensure stability and prevent the Display
from falling down.
6
(All of the following accessories are manufactured by Panasonic Corporation.)
B
A Holding Strip (1)
safety precaution before carrying out any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from
becoming dusty.
• Built-up dust on the power cord plug can increase
humidity which might damage the insulation and cause
fire. Unplug the cord from the wall outlet and clean it
with a dry cloth.
This Display radiates infrared rays, therefore it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct
or reflected light from your Display.
Note:
Image retention may occur. If you display a still picture for
an extended period, the image might remain on the screen.
However, it will disappear after a while.
Assembly screw (1)
size: 4 mm x 10
C Wood screw (1)
B
A
C