Assembling The Pedestal - Panasonic TC-P54Z1 Quick Start Manual

■

Assembling the pedestal

Be careful not to scratch the surface (part with
gloss finish) of the base during assembly
Remove the cable cover attached to the
frame. (It will be used again after the pedestal
is attached to the display Unit.)
Fix securely with assembly screws
Tighten screws firmly (tightening torque: 1.8 - 2.0 N• m)
Hole for the base installation
Base
■
Set-up
Attach the pedestal to TV
Slide the pedestal frame posts into the brackets on the back of the TV.
Fix securely with assembly screws
Tighten screws firmly (tightening torque: 1.5 - 1.8 N• m)
Pedestal
Attach the cable cover
Cable cover
Tabs
Insert the tabs of the
cable cover into the hole at
the back of the pedestal.
Attaching the pedestal to TV
. (Total 2 screws)
A
A
. (Total 4 screws)
C
C
Holder cover
Attach the Holder cover with assembly screws
(Total 4 screws)
B
Cable
Hole
Accessories
Frame
Assembly screws
A
Cable cover
M8 × 30 (Silver) (2)
B
M4 × 10 (Black) (4)
C
M5 × 25 (Black) (4)
Base (1)
Frame
Frame (1)
Base
Holder cover (1)
Place each cable in the groove at the back of the
pedestal and snap the cable cover in.
* The lower part of the groove is separated in right
and left. Use the one suitable for you.
.
B
9