FujiFilm FINEPIX s8000fd Owner's Manual page 149

Z Connecting
Matters
There is no image
or sound on the
TV.
Connecting to TV
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to Cannot print with
printer PictBridge.
Z Others
Matters
Nothing happens
when pressing the
buttons on the
camera.
Camera operation
etc.
The camera no
longer works
correctly.
Downloaded From camera-usermanual.com Fujifilm Manuals
Problems Possible causes
The camera is not connected to the TV
correctly.
The included A/V cable was connected
during movie playback.
"TV" is selected as the TV input.
The video output setting is incorrect.
The TV volume is turned down.
The video output setting is incorrect.
The USB cable is not correctly connected
to the PC or camera.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
Problems Possible causes
Camera malfunction may be caused
temporarily.
The batteries have run out.
Camera malfunction may be caused
temporarily.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to "VIDEO".
Change the setting to [NTSC] or [PAL].
Adjust the volume.
Change the setting to [NTSC] or [PAL].
Set up the camera, and connect the USB
cable correctly.
• Set up the camera, and connect the USB
cable correctly.
• Turn the printer on.
Solutions
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
Load new or fully charged batteries.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again. If you think the
camera is faulty, contact your FUJIFILM
dealer.
Page
120
109,
120
–
111,
113
–
111,
113
131
122
Page
16,
17,
121,
16, 17
16,
17,
121
149