Disassembly Procedure - Samsung CLP-300 Series Service Manual

Disassembly and Reassembly

5.4 Disassembly Procedure

5.4.1 Cover Unit
1. Open a Front-Cover and Remove the Imagine Unit.
2. Remove the ITB Unit
1) Pull out the unit toward out side of printer slightly.
2) Lift up the unit gently.
3) Pull out the unit gently.
Service Manual
5-10
3. Unscrew 2 screws on the Top Cover and then remove
the Top Cover.
4. Unscrew 1 screw on the Right Cover and then
remove the Right Cover after open the Rear Cover.
Samsung Electronics