Configuration Information - Dell PowerConnect 6224 Planning And Preparation Manual

2.4

Configuration information

Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it available
for reference during the configuration.
Table 1 IP addresses needed for configuration:
Host iSCSI Initiator
Port 1
Port 2
Port 3
Port 4
Array Target
Port 1 (eth0)
Port 2 (eth1)
Management
(Out-of-Band or eth2)
Array Group Management IP
(Out-of-Band)
Array Group Management IP
(In-Band)
Switch Management Port
(Out-of-Band)
Switch Admin password: _________________________
Array Group Admin password: __________________________*
Array Membership password: ___________________________*
*These may be the same password – see the PS-series Group Administration guide for more information.
6 Dell PowerConnect 6224 or 6248 | Planning and Preparation Guide | Rapid EqualLogic Configuration Series
Host #1 Additional host
Array #1 Additional array
...
...