Initial Settings; Adjusting Initial Settings; Setting The Fm Tuning Step; Switching Auto Pi Seek - Pioneer KEH-P2030R Owner's Manual

Hide thumbs Also See for KEH-P2030R:
Table of Contents

Advertisement

Available languages

Available languages

Section

Initial Settings

09

Adjusting initial settings

Initial settings lets you perform initial set up of
different settings for this unit.
1
Press SOURCE and hold until the unit
turns off.
2
Press AUDIO and hold until STEP ap-
pears in the display.
Press AUDIO repeatedly to switch between
the following settings:
STEP (FM tuning step)A-PI (Auto PI Seek)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down AUDIO until the unit turns off.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1
Press AUDIO to select STEP.
Press AUDIO repeatedly until STEP appears in
the display.
2
Press c or d to select the FM tuning
step.
Pressing c or d will switch the FM tuning
step between 50 kHz and 100 kHz while AF or
TA is on. The selected FM tuning step will ap
pear in the display.
18
En
HHHHHHHHHHHHHH
Note
The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ
ent station with the same programming, even
during preset recall.
1
Press AUDIO to select A-PI.
Press AUDIO repeatedly until A-PI appears in
the display.
2
Press VOLUME up/+ or down/ to
switch the Auto PI seek on or off.
Pressing VOLUME up/+ or down/ will turn
A-PI on or off and that status will be displayed
(e.g., A-PI :ON).
Black plate (18,1)
<CZR2959-A>18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Keh-p2033r

Table of Contents