Zotac ZBOX User Manual page 16

1. Connecting to USB 2.0 devices
Connect USB devices like wired/wireless keyboards (varying with areas), mouse devices and
printers to the USB ports on the system rear panel.
2. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to the USB 3.0
port on the system rear panel.
3. Connecting to HDMI displays
Connect one end of an HDMI cable to the HDMI port on the system rear panel and the other
end to a HDMI-compatible display such as an HDTV or monitor.
4. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
End to a hub or switch.
5. Connecting a WiFi antenna module
Connect a WiFi antenna module to the WiFi antenna connector.
6. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
 When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet
to save on power consumption.
ZOTAC ZBOX
15