Magellan 5430T-LM User Manual page 40

Location
Region
Displays the currently selected region for
the map used. When additional maps are
available you can select the desired region
to be used.
Set GPS Position
The current location is normally used for
search and routing purposes.
The default setting is GPS — the current location is calculated from signals received from the
GPS satellite constellation. Select Manual to set "current location" from a search, contacts or
OneTouch options.
Sounds
Volume
Use the slider bar to set the volume level
for the device.
Smart Volume
When checked Smart Volume will
automatically adjust the volume up or
down depending upon existing noise
levels.
Turn Warnings
Tap to access a list of available sounds that can be used when alerting you to an upcoming
turn.
NOTES
When creating a route and searching for POIs, the Magellan Road-
Mate always starts from its "current location". For planning purposes,
you can set "current location to a place you want to go to. Then yor
searches will start from there.
NOTES
When the Magellan RoadMate is turned off, (full shutdown) it will
start up with current location in GPS mode. If it is merely suspended,
it will 'wake up' with its 'current location' mode unchanged.