Table of Contents
Advertisement
Edimax Pro NMS
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user-based security model (USM) architecture.
IV-7-3-2.
Date and Time
You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized
with a time server.
Date and Time Settings
Local Time
Acquire Current
Time from your PC
NTP Time Server
Use NTP
Server Name
Update Interval
Set the access point's date and time manually
using the drop down menus.
Click "Acquire Current Time from Your PC" to
enter the required values automatically
according to your computer's current time and
date.
The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.
Enter the host name or IP address of the time
server if you wish.
Specify a frequency (in hours) for the access
point to update/synchronize with the NTP
server.
211
Advertisement
Table of Contents
