Canceling The Demonstration Display (Demo Off); Initial Settings; Receiving Preset Stations; Best Stations Memory - Pioneer DEH-X4900BT Owner's Manual

4
Press the M.C. dial to confirm the settings.
NOTES
• You can cancel the menu setting by pressing SRC/OFF .
• These settings can be made at any time from the SYSTEM settings (page 16) and INITIAL settings
(page 6).
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4
Turn the M.C. dial to select [YES], then press to confirm.
1
Press and hold SRC/OFF until the unit turns off.
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [INITIAL], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
SP-P/0 MODE
[REAR/SUB.W]
[SUB.W/SUB.W]
[REAR/REAR]
6En
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
RCA output.
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
S/WUPDATE
[SYSTEM INFO]
[SYSTEM UPDATE]
[BT VERSION]
[BT UPDATE]
SYSTEM RESET
[YES], [NO]
I
Radio
Select to confirm the latest system information on the unit.
Select to update the unit to the latest software and initialize the
unit settings. For details on the latest software and updating,
visit our website.
Select to display the system version of the unit and the
Bluetooth module.
Select to update the unit to the latest Bluetooth software. For
details on Bluetooth software and updating, visit our website.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
(Some of the settings will be retained even after resetting the
unit, such as Bluetooth pairing information, etc.)
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
1
Press SRC/OFF to select [RADIO].
2
Press
BAND/~
to select the band from [FM1 ], [FM2], [FM3] or [AM].
3
Press a number button {1/
A
to 6/¢..).
TIP
The~~~
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 15).
The six strongest stations are stored on the number buttons (1/
A
to 6/¢..).
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to c;onfirm.