Sony DSC-HX90V Manual page 50

Allows you to create a single panoramic image from multiple images shot while panning the
camera.
1. Set the mode dial to
2. Point the camera at the subject.
3. While pressing the shutter button halfway down, aim the camera at one end of the
desired panoramic composition.
(A) This part will not be shot.
4. Press the shutter button fully down.
5. Pan the camera to the end of the guide in the direction of the arrow on the monitor.
(B) Guidance bar
Note
If the entire angle of the panoramic shot is not achieved within the set time, a gray area
(iSweep Panorama).