Call Tone - TALKCOM TC750 User Manual

Select FM Radio Frequency
Press "
LCD will display FM Radio Frequency.
Press and hold "
frequency.
It will stop when it finds a FM radio channel. The LCD will
display the frequency and you can listen to the FM radio.
You can continue to scan for the FM radio frequency you
preferred.
Press "
radio.
When you receive other PMR call signal, or you press PTT
key to transmit, the unit will automatically switch to PMR
mode.
After finish PMR communication, you can press "
3 times again to enter FM mode. The unit will remain on the
last FM radio frequency you have selected.

Call Tone

You can use Call Tones to get the attention of other people with
radios on the same channel and CTCSS tone. You can also use
Call Tones as the signal of the start or end of a transmission.
Press "
be transmitted to nearby receivers set at the same
channel.
There are 10 different call tones to choose from.
Selecting Call Tone
Press "
icon and call tone number will flash,
Press "
Press the "PTT" Key to confirm and quit
Or press "
confirmed and enter into next function selection.
" key 3 times.
" or"
" Key to adjust the volume when listening to FM
" key, LCD displays
" key four times, LCD display shows the
" or " " key to select your desired the call tone.
" key once, the last selection will be
" key to scan FM radio
icon and your call tone will
" Key
11