Advanced Cd Or Mp3/Wma Disc Playback - Pioneer xc-hm70-k Operating Informations

Listening to a CD or MP3/WMA disc

Advanced CD or MP3/WMA disc playback

Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
 Use the numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
• The numeric buttons allow you to select up to number 9.
• When selecting number 100 or higher, use the "+100"
button.
• When selecting number 10 or higher, use the "+10"
button.
A. For example, to choose 13
1 Press the "+10" button.
2 Press the "3" button.
CD
F008 T001
Selected track number
B. For example, to choose 130
1 Press the "+100" button.
2 Press the "+10" button three times.
3 Press the "0" button.
Note
• A track number higher than the number of tracks on the
disc cannot be selected.
14
En
• During shuffle play, direct track search is not possible.
To stop playback:
Press the button.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
• During repeat play, "
F008
To repeat one track:
Press the REPEAT button repeatedly until "Repeat One"
appears. Press the
To repeat all tracks:
Press the REPEAT button repeatedly until "Repeat All"
appears. Press the
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on this
page and then press the REPEAT button repeatedly until
"Repeat All" appears.
To cancel repeat play:
Press the REPEAT button repeatedly until "Repeat Off"
appears and "
00:00
Shuffle play
The tracks on the disc can be played in shuffle order
automatically.
• During shuffle play, "
F008
" appears.
CD
T001 00:00
/ ( ) button.
/ ( ) button.
" disappears.
" appears.
CD
T001 00:00
To shuffle play all tracks:
Press the SHUFFLE button on the remote control.
To cancel shuffle play:
Press the SHUFFLE button and " " disappears.
Note
• If you press the button during shuffle play, you can
move to the track selected next by the shuffle operation.
On the other hand, the button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
• In shuffle play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
• After performing repeat play, be sure to press the
button. Otherwise, the disc will play continuously.
Programmed play (CD)
You can choose up to 32 selections for playback in the order
you like.
1 Whilst in the stop mode, press the PLAY MODE button
on the remote control to enter the programming save
mode.
PROGRAM
P - 01 ← T--
2 Press the or button or numeric buttons on the
remote control to select the desired track.
PROGRAM
P - 01 ← T005