Sharp AR-RP3 Service Manual page 3

2. Installation
Parts included
Intermediate tray
(only for AR-RP3/DM-RP1)
Turn off the main switch of the copier and then remove the power plug
of the copier from the outlet.
1. Remove the platen cover.
Lift the platen cover and remove it from the copier.
2. Remove the screws of the glass holders.
Remove the two screws (M3 x 8) of the left glass holder and the three
screws (M3 x 8) of the right glass holder.
Screws (M3 x 8)
3. Remove the front cabinet.
While raising the front cabinet toward your side, remove the three
pawls from the rear side of the front cabinet.
Pawls
RSPF glass cover
Screws (M3 x 8)
4. Remove the glass holders (right and left) and remove
the document glass.
Remove the right and left glass holders and remove the document
glass.
Document glass
Left glass holder
5. Attach the front cabinet.
Attach the front cabinet of the copier.
At this time, ensure that the three pawls on the rear side are securely
inserted to the frame of the copier.
Pawls
6. Attach the RSPF glass holder.
Insert the RSPF glass holder to the document glass.
Then, attach the document glass to the copier, fix the left glass holder
that has been removed in step 3 using two screws (M3 x 8), and fix
the RSPF glass using three screws (M3 x 8).
RSPF glass holder
Document glass
Screws (M3 x 8)
Right glass holder
Screws (M3 x 8)