HP ProLiant SL270s Generation 8 Quickspecs page 12

Table of Contents

QuickSpecs

Optional Features

HP Simple Configurator

Computational and

Graphics Accelerators

For more information on Factory Express services for your specific server model please contact your

sales representative or go to: http://www.hp.com/go/factory-express.

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial

configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use

in your existing ordering processes. If you require "custom" rack configuration or configuration for

products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner

for assistance.

http://www.hp.com/products/configurator

Each SL270s tray will accommodate up to eight computational or graphics accelerators, with options

including NVIDIA Tesla K20, K20x, K40 and K80 GPUs, NVIDIA GRID K2 GPUs, Intel® Xeon Phi™ 5110p

and AMD S9150 Firepro Coprocessors.

NOTE: The maximum number of NVIDIA Tesla K20, K20x and K40 GPUs and Intel® Xeon Phi™ 5110p

coprocessors supported is 8. The maximum number of NVIDIA GRID K2 and K80 GPUs is 4.

NOTE: The NVIDIA GRID K2 and K80 operate at PCIe Gen 3. All other accelerators operate at PCIe Gen 2.

NOTE: When adding accelerators to the SL270s servers, one must utilize the HP 1200W CS Platinum

Power Supply Kit, 578322-B21,or the HP1500W CS Platinum Power Supply Kit, 684532-B21, for all

four power supply slots.

NOTE: When adding Nvidia Tesla K2, K20, K20X or K40 accelerators to the SL270s servers, one must

utilize the HP SL270 NVIDIA GPU Enablement Kit. When adding Intel Xeon Phi 5110p Coprocessors, one

must utilize the HP SL270 Coprocessor Enablement Kit.

NOTE: When adding Nvidia Tesla K80 accelerator to the SL270s servers, one must utilize the HP SL270

K80 GPU Enablement Kit.

NOTE: When adding AMD S9150 Firepro accelerator to the SL270s servers, one must utilize the HP

SL270 AMD GPU Enablement Kit.

NOTE: When implementing 7 or 8 accelerators, one must utilize the HP 1500W CS Platinum Power

Supply Kit, 684532-B21.

NOTE: One must configure a minimum of 4GB of memory per processor when accelerators are

installed.

NOTE: Mixing of accelerators or coprocessors within the same server is not allowed.

NOTE: At this time, the NVIDIA Tesla K40 is operated at PCIe Gen2.

NOTE: The NVIDIA Tesla K40 and K80 and AMD S9150 Firepro are only supported on E5-2600v2

processors.

c04123204 -DA – 14405 Worldwide — Version 24 — March 30, 2015

HP ProLiant SL270s Generation 8 (Gen8)

Page 12

Table of Contents